Dr.-Ing. Christian Richter
Dr.-Ing. Christian Richter
Institut für Logistik und Materialflusstechnik (ILM)
Completed projects
Automated GNSS-based data and process management for composting plants
Duration: 01.10.2021 bis 30.09.2023
Commercial composting in Austria is regulated by the Compost Ordinance [1]. At composting plants, the material to be processed is piled up in triangular windrows and turned regularly during composting with the help of compost turners. Each individual triangular windrow must be precisely documented in order to be able to prove which source material was used to produce the compost. In addition, the Austrian Compost Ordinance stipulates that the temperature of the triangular windrows must be measured and documented daily. This extensive measurement and documentation process, which is currently carried out manually, involves a considerable and increasing amount of work.
The ANDREA project (Automated GNSS-supported data and process management for composting plants) aims to develop a concept for an automated management system for composting that reduces the measurement and documentation effort for compost producers. In the project, the temperature measurements required by the Compost Ordinance are to be carried out directly by a compost turner and georeferenced using GNSS-based trajectory determination. The measurements will then be mapped in a management system for composting, which should give compost producers a better overview of the composting process.
The innovative content of the project can be demonstrated for several aspects. Firstly, a new measurement concept must be designed that makes it possible to measure the temperature of the compost directly on the compost turner during the turning process. In order to automate the processes in the best possible way, an innovative navigation module is being further developed for the compost turner. This will calculate complex routes and steer the compost turner along the pre-calculated routes. The degree of autonomy is to be increased by expanding the GNSS-based positioning module to include obstacle detection. In addition, imaging sensors for night-time operation are being investigated so that the battery-powered compost turner can be charged with solar power during the day and then carry out measurements as autonomously as possible at night. In order to achieve innovative traceability of the compost, its mixing before and after compost turning will be investigated in detail using the coupled discrete element method and displayed in the data management system.
The aim is to find out to what extent the documentation effort resulting from the provisions of the Compost Ordinance can be reduced by automated, GNSS-supported processes. A clear data management system should give compost producers a better overview of the composting process and thus increase the efficiency of composting plants. This can reduce the emission of harmful greenhouse gases such as methane.
Project coordinator:
Sonnenerde GmbH
Project partners:
Graz University of Technology
Pusch & Schinnerl GmbH
Otto von Guericke University Magdeburg - Institute for Logistics and Material Flow Technology
This text was translated with DeepL
NekoS 3iS Intelligent-Cloud-Maintenance
Duration: 01.01.2018 bis 30.06.2020
The main objective of the R&D cooperation project "3iS" is the development of intelligent idler roller stations for recording real-time status variables and their transmission using a long-range low-power wireless network (LoRa™ WAN) in the license-free 868 MHz band. The R&D project also includes the development of a method for the stochastic evaluation of real-time status variables for idler roller stations using cloud-based technologies for the early detection of bearing damage as part of the condition-based maintenance of large-scale opencast mining equipment.
The planned project is designed to run for 2.5 years. An SME (AKT) and a research institution (OVGU) are involved in the realization of the development. In addition, an associated partner (LEAG) is involved in the project to support the development of a practicable solution.
The envisaged R&D project is an R&D project that emerged from the ZIM network "NekoS" and will be supported in its implementation by the network management facility ZPVP, Zentrum für Produkt-, Verfahrens- und Prozessinnovation GmbH/Experimentelle Fabrik Magdeburg.
This text was translated with DeepL
Sensing Idler Development of self-sufficient measuring idler collectives for condition-based maintenance of conveyor systems
Duration: 01.04.2016 bis 31.10.2016
The aim of the project is to develop idlers with integrated temperature monitoring electronics. The aim is to prevent belt fires due to roller bearings running hot. To this end, the current bearing temperature on each side of the idler roller is to be permanently measured and compared with the prevailing ambient temperature. In order to eliminate environmental influences caused by different levels of solar radiation, the temperatures of several idler stations are to be aggregated to form an idler collective. This makes it possible to effectively identify defective bearings in idlers.
This text was translated with DeepL
SimBa - Software system for holistic simulation of component loads and stresses on construction machinery and conveyor systems
Duration: 01.09.2013 bis 31.08.2015
Computer simulation of components has become firmly established in today's development process for modern machines and systems in construction machinery and conveyor technology. Using the finite element method (FEM), component stresses can be simulated before a prototype is even produced. However, this requires detailed load assumptions as input variables. The dynamic loads in mining and conveying processes depend to a large extent on the soil or material being conveyed. These loads can be reliably simulated using the Discrete Element Method (DEM). For many machines and systems, it is also necessary to consider the often complex kinematics in order to capture the real movement behavior of the relevant components and any dynamic effects that may occur. As part of this project, a software interface for the coupled
DEM-MKS-FEM simulation
developed on the basis of widely used simulation programs. The interface algorithms are scientifically verified and the simulation results experimentally validated to prove their suitability for practical use. The interface makes it possible for the first time to simulate component loads and stresses at structural level for construction machinery (e.g. shovels, milling machines) and conveyor systems (belt conveyors, bucket elevators) with realistic, dynamic load assumptions.
This text was translated with DeepL
Development of intelligent idler roller garlands to increase energy efficiency and reduce noise emissions
Duration: 01.05.2011 bis 30.04.2013
The aim of the research project is to make the design of idlers for belt conveyors more energy-efficient and quieter. Belt conveyors are used in all branches of industry for the internal realization of small to very large mass flows. . Increasingly stringent environmental requirements demand new technologies so that conveyor systems consume less energy and therefore produce less (02.
The development of an idler roller garland that adapts to the loading of the belt, a so-called "intelligent garland", could drastically reduce the energy consumption and belt misalignment of such systems. The intelligent suspension of the garlands can be expected to increase the service life of the idlers due to more even closure. The elastic suspension of the garland also considerably reduces noise emissions, which reduces the burden on people and the environment in the vicinity of belt conveyors. The project aims to develop such an intelligent garland, test it on a test rig under real operating conditions and optimize it for industrial use.
This text was translated with DeepL
2021
Book chapter
Smart Monitoring im Einsatz: LoRaWAN TM basiertes Sensornetzwerk zur permanenten Überwachung von Förderanlagen
Chumachenko, Yevgeniy; Richter, Christian; Katterfeld, André
In: 25. Fachtagung Schüttgutfördertechnik 2021 - "Computersimulation, Organisation, Virtualisierung, Innovation, Digitalisierung" : am 22. und 23. September 2021 in Magdeburg : herausgegeben als Begleitband zur gleichnamigen Fachtagung - Magdeburg : Universitätsbibliothek ; Katterfeld, André *1977-*, S. 83-97
2020
Book chapter
Anwendung der DEM-MK-Simulation am Beispiel von Becherwerken
Richter, Christian; Katterfeld, André
In: Tagungsband zum 16. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik e.V. (WGTL) / Wissenschaftliche Gesellschaft für Technische Logistik , 2020 - Hamburg : Technische Universität Hamburg, Institut für Technische Logistik - Hamburg, 01. und 02. Oktober 2020, S. 29-35
Peer-reviewed journal article
Smart Monitoring in der Praxis - Web 4.0 und IoT-Technologien steigern Sicherheit und Produktivität von Förderbandanlagen
Chumachenko, Yevgeniy; Richter, Christian; Katterfeld, André
In: Schüttgut & Prozess - Wiesbaden : BSB+P Communication Group, bulkmedia division . - 2020, Heft 5, S. 20-27
Calibration of cohesive DEM parameters under rapid flow conditions and low consolidation stresses
Ajmal, Mohsin; Rößler, Thomas; Richter, Christian; Katterfeld, André
In: Powder technology - Amsterdam [u.a.] : Elsevier Science, Bd. 374 (2020), S. 22-32
Anwendung der DEM-MK-Simulation am Beispiel von Becherwerken - Application of coupled DEM-MBD simulation at the example of bucket elevators
Richter, Christian; Katterfeld, André
In: Logistics journal - Stuttgart : WGTL . - 2020, insges. 7 S.
Coupled discrete element and multibody simulation, part I - implementation, verification and validation
Richter, Christian; Rößler, Thomas; Otto, Hendrik; Katterfeld, André
In: Powder technology - Amsterdam [u.a.] : Elsevier Science, Bd. 379 (2021), S. 494-504
Dissertation
Gekoppelte Diskrete Elemente und Mehrkörpersimulation am Beispiel von Becherförderern
Richter, Christian; Katterfeld, André
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2020, X, 157 Seiten [Literaturverzeichnis: Seite 149-157][Literaturverzeichnis: Seite 149-157]
2019
Abstract
Multilevel DEM approach for the simulation of the interaction between bulk material and a multitude of freely moveable machine parts
Katterfeld, André; Richter, Christian
In: 3rd CFDEM®conference - Linz . - 2019, S. 22-23
Book chapter
Calibration procedure of Discrete Element Method (DEM) - parameters for cohesive bulk materials
Carr, Michael J.; Rößler, Thomas; Otto, Hendrik; Richter, Christian; Katterfeld, André; Wheeler, Craig, A.; Williams, Kenneth; Elphick, Greg; Nettleton, Kylie
In: Conference proceedings - Barton : Institution of Engineers Australia ; Jones, Mark . - 2019, insges. 15 S. [Kongress: ICBMH 2019, 09-11 July 2019, Gold Coast, Queensland, Australia]
Tubular push conveyor - functional analysis and simulation
Katterfeld, André; Richter, Christian; Pusch, Matthias; Kamps, Rolf
In: Conference proceedings - Barton : Institution of Engineers Australia ; Jones, Mark . - 2019, insges. 10 S. [Kongress: ICBMH 2019, 09-11 July 2019, Gold Coast, Queensland, Australia]
Functional analysis and multilevel DEM simulation of the innovative tubular push conveying principle
Katterfeld, André; Richter, Christian; Kamps, Rolf
In: XXIII International Conference on "Material Handling, Constructions and Logistics", MHCL 2019, September 18th - 20th, 2019 , 2019 - Belgrade, Serbia : University of Belgrade ; Kartnig, Georg, S. 1-6 [Konferenz: MHCL 2019, Vienna, September 18th - 20th]
Intelligent IoT maintenance using LoRaWAN
Richter, Christian; Fessel, Karl; Katterfeld, André
In: Smart SysTech 2019 , 2019 - Berlin : VDE VERLAG, S. 8-12 [Konferenz: Smart SysTech 2019, 4-5 June 2019, Magdeburg, Germany]
Smart Monitoring - Web 4.0 - Internet of Things (IoT)
Chumachenko, Yevgeniy; Richter, Christian; Katterfeld, André
In: 24. Fachtagung Schüttgutfördertechnik 2019 , 2019 - Magdeburg : LOGiSCH GmbH, S. 31-40 [Tagung: 24. Fachtagung Schüttgutfördertechnik Magdeburg, 25. und 25. September, Magdeburg]
Anwendungsszenario des Internet der Dinge am Beispiel von Tragrollenheißläufern bei Gurtförderanlagen
Richter, Christian; Fessel, Karl; Katterfeld, André; Chumachenko, Yevgeniy
In: 15. Fachkolloquium 11. + 12. September 2019 - Rostock : Universität Rostock, Lehrstuhl für Produktionsorganisation & Logistik, S. 97-101 [Tagung: 15. Fachkolloquium der WGTL e.V., 11. und 12. September 2019, Rostock]
3iS - intelligent IoT idler stations for the identification of damaged idler bearings
Katterfeld, André; Richter, Christian; Fessel, Karl; Ajmal, Mohsin; Schwandtke, Rolf; Chumachenko, Yevgeniy
In: Conference proceedings - Barton : Institution of Engineers Australia ; Jones, Mark . - 2019, insges. 10 S. [Kongress: ICBMH 2019, 09-11 July 2019, Gold Coast, Queensland, Australia]
Peer-reviewed journal article
Development of a standard calibration procedure for the DEM parameters of cohesionless bulk materials - part II - efficient optimization-based calibration
Richter, Christian; Rößler, Thomas; Kunze, Günter; Katterfeld, André; Will, Frank
In: Powder technology - Amsterdam [u.a.] : Elsevier Science . - 2019 [Online first]
2018
Book chapter
Numerische Simulation eines Schubelementeförderers
Richter, Christian; Pusch, Matthias; Katterfeld, André; Kamps, Rolf
In: Tagungsband zum 14. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik e.V. (WGTL) / Wissenschaftliche Gesellschaft für Technische Logistik , 2018 - Rostock-Warnemünde : Wissenschaftliche Gesellschaft für Technische Logistik e.V. (WGTL), S. 263-272 [Konferenz: WGTL 2018]
Simulation von Kreiselbrechern mit Hilfe gekoppelter DEM- und Maschinensimulation
Katterfeld, André; Richter, Christian; Otto, Hendrik; Szczelina, Piotr; Rossiter, Eduardo
In: 8. Kolloquium Fördertechnik im Bergbau , 2018 , 1. Auflage - Clausthal-Zellerfeld : Papierflieger Verlag GmbH, S. 111-120 [Tagung: 8. Kolloquium Fördertechnik im Bergbau, 31. Januar und 1. Februar 2018 in Clausthal]
Peer-reviewed journal article
Multilevel DEM-Simulation des Bewegungsverhaltens von Getränkeflaschen im Pulk
Richter, Christian; Katterfeld, André; Pusch, Matthias
In: Logistics journal. Proceedings - Stuttgart : WGTL . - 2018, insges. 10 S.
Numerische Simulation eines Schubelementeförderers
Richter, Christian; Pusch, Matthias; Katterfeld, André; Kamps, Rolf
In: Logistics journal. Proceedings - Stuttgart : WGTL . - 2018, insges. 10 S.
Non-peer-reviewed journal article
Multilevel DEM-Simulation des Bewegungsverhaltens von Getränkeflaschen im Pulk
Richter, Christian; Katterfeld, André; Pusch, Matthias
In: Logistics journal / Nicht-referierte Veröffentlichungen: LJ - Stuttgart: WGTL, 11, insges. 10 S., 2018
2017
Abstract
Validation of coupled discrete element and multi body simulations in material handling
Otto, Hendrik; Richter, Christian; Katterfeld, André
In: CFDEM®conference - Linz . - 2017, S. 41
Article in conference proceedings
Dem Bechernicken auf der Spur
Richter, Christian; Katterfeld, André; Rößler, Thomas
In: Tagungsband zum 13. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik e.V. (WGTL) / Wissenschaftliche Gesellschaft für Technische Logistik , 2017 - Rostock-Warnemünde : Wissenschaftliche Gesellschaft für Technische Logistik e.V. (WGTL), S. 237-243 [Tagung: 12. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik e.V. (WGTL), Graz, 20. und 21. September 2017]
2016
Book chapter
Reducing the energy consumption of belt conveyors by the use of intelligent garlands
Katterfeld, André; Richter, Christian; Gladysiewicz, Adam; Schwandtke, Rolf
In: ICBMH 2016 - The Institution of Engineers, Australia ; Hastie, David, S. 600-605
Simulation of the dynamic interaction between bulk material and heavy equipment - calibration and validation
Heß, Georg; Richter, Christian; Katterfeld, André
In: ICBMH 2016 - The Institution of Engineers, Australia ; Hastie, David, S. 427-436
Scientific monograph
Softwaresystem zur ganzheitlichen Simulation der Bauteilbelastung und -beanspruchung von Baumaschinen und Förderanlagen - Schlussbericht des im Rahmen der Fördermaßnahme KMU-innovativ: IKT geförderten Verbundprojekts SimBa der Otto-von-Guericke-Universität Magdeburg, Institut für Logistik und Materialflusstechnik : (Projektlaufzeit: 01.09.2013-31.08.2015)
Katterfeld, André; Richter, Christian
In: Magdeburg: Otto-von-Guericke-Universität Magdeburg: Institut für Logistik und Materialflusstechnik, 2016, 1 Online-Ressource (77 Seiten, 5,07 MB) [Förderkennzeichen BMBF 01 IS 13 006 A. - Verbund-Nummer 01147848; Autoren dem Berichtsblatt entnommen; Unterschiede zwischen dem gedruckten Dokument und der elektronischen Ressource können nicht ausgeschlossen werden]
2015
Book chapter
DEM4X - Bibliothek für den Aufbau und die Berechnung von DEM-Modellen in SimulationX
Kunze, Günter; Katterfeld, André; Richter, Christian; Otto, Hendrik; Schreiber, Uwe; Ohser, Florian; Arloth, Jörg
In: Fachtagung Baumaschinentechnik 2015 - Frankfurt am Main : FVB ; Bauer, Sebastian, S. 135-148 - (Schriftenreihe der Forschungsvereinigung Bau- und Baustoffmaschinen; 49) [Kongress: 6. Fachtagung Baumaschinentechnik, Dresden, 17-18.09.2015]
Article in conference proceedings
Gekoppelte diskrete Elemente Simulation und Maschinensimulation zur Ermittlung von auslegungsrelevanten Lastannahmen für Schwerlastantriebe am Beispiel von Primärbrechern
Katterfeld, André; Otto, Hendrik; Richter, Christian; Rossiter, Eduardo; Szczelina, Piotr
In: Antriebstechnisches Kolloquium ATK 2015 - Aachen ; Jacobs, Georg, S. 551-564 Kongress: Antriebstechnisches Kolloquium 16 Aachen 2015.03.03-04
Kopplung von Maschinen- und Partikelsimulation zur Analyse der lastabhängigen Interaktion von Baustoffen und Transportgeräten - Coupling of machine and particle simulations to analyse the load-dependent interaction between building materials and conveying equipment
Katterfeld, André; Richter, Christian
In: IAB-Wissenschaftstage - Weimar : IAB Weimar ; Palzer, Ulrich . - 2015, S. 120-122
CFD-DEM-Simulation und experimentelle Untersuchung des Fließverhaltens von Mondsand Regolith
Kerst, Kristin; Otto, Hendrik; Richter, Christian; Katterfeld, André; Janiga, Gábor
In: Jahrestreffen der Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen, Lüneburg, 19. - 20. März 2015, Lüneburg - DECHEMA - 2015, Art. P23
2014
Non-peer-reviewed journal article
Simulation der peristaltischen Förderung von Stückgütern als Schüttgut
Cao, Liu; Richter, Klaus; Richter, Christian; Katterfeld, André
In: Logistics journal / Nicht-referierte Veröffentlichungen - Stuttgart: WGTL, 2004 . - 2014, insges. 9 S.
2013
Book chapter
Verifizierung der Intelligenten Girlande
Gladysziewicz, Adam; Schwandtke, Rolf; Richter, Christian; Katterfeld, André
In: 18. Fachtagung Schüttgutfördertechnik 2013 - Treffpunkt für Forschung & Praxis ; am 25. und 26. September in Magdeburg ; [als Begleitband zur gleichnamigen Fachtagung]: Treffpunkt für Forschung & Praxis ; am 25. und 26. September in Magdeburg ; [als Begleitband zur gleichnamigen Fachtagung]/ Fachtagung Schüttgutfördertechnik - Magdeburg: LOGISCH GmbH, 2013 . - 2013, S. 269-288Kongress: Fachtagung Schüttgutfördertechnik 18 (Magdeburg : 2013.09.25-26)
Stückgüter als Schüttgut - Konzept Peristaltik-Förderer
Cao, Liu; Richter, Christian; Richter, Klaus
In: 18. Fachtagung Schüttgutfördertechnik 2013 - Treffpunkt für Forschung & Praxis ; am 25. und 26. September in Magdeburg ; [als Begleitband zur gleichnamigen Fachtagung]: Treffpunkt für Forschung & Praxis ; am 25. und 26. September in Magdeburg ; [als Begleitband zur gleichnamigen Fachtagung]/ Fachtagung Schüttgutfördertechnik - Magdeburg: LOGISCH GmbH, 2013 . - 2013, S. 171-182Kongress: Fachtagung Schüttgutfördertechnik 18 (Magdeburg : 2013.09.25-26)
2012
Article in conference proceedings
Plattform- und softwareunabhängige Simulation der Erdstoff-Maschine Interaktion
Kunze, Günter; Katterfeld, André; Richter, Christian; Otto, Hendrik; Schubert, Christian
In: Fachtagung Baumaschinentechnik 2012: Energie, Mechatronik, Simulation ; [20.-21. September 2012, Dresden] ; Tagungsband / Veranst.: Technische Universität Dresden, Institut für Verarbeitungsmaschinen und Mobile Arbeitsmaschinen, Professur für Baumaschinen- und Fördertechnik; Verband Deutscher Maschinen- und Anlagenbau e.V. ... [Programmausschuss: Sebastian Bauer] ...: Energie, Mechatronik, Simulation ; [20.-21. September 2012, Dresden] ; Tagungsband - Frankfurt am Main: FVB, 2012; Bauer, Sebastian . - 2012, S. 251-262
Original article in peer-reviewed international journal
Robuste Tiefenbildmessung für die Schüttguttechnik
Richter, Klaus; Richter, Christian; Cao, Lio
In: Cement international: processing, performance, application: processing, performance, application - Erkrath: Verl. Bau + Technik, 2002, Bd. 10.2012, 1, S. 66-75
Original article in peer-reviewed periodical-type series
Elektromobilität - Kleintransporter für City- und Intralogistik
Richter, Christian; Richter, Klaus; Schenk, Michael
In: Jahrbuch Logistik. - Korschenbroich : free beratung GmbH, S. 22-26, 2012
2011
Book chapter
Robuste Tiefenbildmessung für die Schüttguttechnik
Richter, Klaus; Richter, Christian; Borstell, Hagen; Cao, Lui
In: 16. Fachtagung Schüttgutfördertechnik 2011 - Anlagen, Bauteile, Computersimulationen ; am 14. und 15. September in Magdeburg ; [als Begleitband zur gleichnamigen Fachtagung]: Anlagen, Bauteile, Computersimulationen ; am 14. und 15. September in Magdeburg ; [als Begleitband zur gleichnamigen Fachtagung]/ Fachtagung Schüttgutfördertechnik - Magdeburg: LOGiSCH, 2011 . - 2011, S. 231-241Kongress: Fachtagung Schüttgutfördertechnik 16 (Magdeburg : 2011.09.14-15)
Article in conference proceedings
Fahrzeugkonzept Elektrofahrzeug mit Wechselbehälter für die City Logistik
Richter, Christian; Richter, Klaus
In: 16. Magdeburger Logistiktage "Sichere und nachhaltige Logistik" - im Rahmen der [14.] IFF-Wissenschaftstage ; 29. Juni - 1. Juli 2011 ; Tagungsband: im Rahmen der [14.] IFF-Wissenschaftstage ; 29. Juni - 1. Juli 2011 ; Tagungsband - Magdeburg, 2011; Schenk, Michael . - 2011, S. 235-241Kongress: Magdeburger Logistiktage Sichere und nachhaltige Logistik 16 (Magdeburg : 2011.06.29-07.01)
Original article in peer-reviewed national journal
3.5 T Elektromobilität: Der intelligente Wechselbehälter
Richter, Christian; Adler, Frederike; Voigt, Martin; Richter, Klaus
In: Forschung vernetzen - Innovationen beschleunigen - 9./10. Forschungskolloquium am Fraunhofer IFF 2010: 9./10. Forschungskolloquium am Fraunhofer IFF 2010 ; [23. April und 04. November 2010] - Magdeburg, 2011 . - 2011, S. 101-106 - (Forschungskolloquium am Fraunhofer IFF; 2.2011)Kongress: IFF-Kolloquium 9/10 (Magdeburg : 2010)
- gekoppelte Diskrete Elemente und Mehrkörpersimulation (DEM/MKS)
- Schüttgutfördertechnik
- Internet der Dinge / Industrie 4.0
- zustandsorientierten Instandhaltung